Motorcycle riding gear failures gloves

Motorcycle riding gear failures

Your motorcycle jackets, pants, gloves and boots that are supposed to protect you in a crash, can sometimes experience failures of the most basic test of simple wear and tear.

However, it is important to differentiate a product failure from a rider error.

Product failures

We recently bought a pair of motorcycle gloves (pictured above) that split the stitching at the cuff after a few weeks of normal riding.

The gloves had a one-year warranty and the shop contacted the distributor who replaced them.

Motorcycle riding gear failures gloves
Same failure

Only a few weeks later the second pair failed in exactly the same way.

Obviously there appears to be an inherent design fault in the gloves.

This is not the only example of motorcycle protective gear failing the basic wear and tear test.

Dr Chris Hurren who researches protective materials for a living and worked with Dr Liz de Rome and others to produce the protocol used by MotoCAP for testing has also experienced basic wear failures.

While trying on a pair of protective denim pants in a store, the top button above the zip pulled apart and fell off.

“This was obviously a problem that the manufacturer knew about as the garment came with a spare metal button however in reality should the product have been in the market place in the first place,” he says.

“This failure before even leaving the store should be a quick indicator of the build product of a garment.”

It’s not Dr Hurren’s only personal encounter with a wear failure.

After spending $700 on a leather jacket, he found the zip failed after two years.

“I have since observed new jackets hanging in store from the same manufacturer with a zip that was corroded and already causing trouble during use,” he says.

“The addition of a low-cost zip to a high-cost jacket significantly reduces its working life.

“Closures like zips, buttons and clips often have higher loading due to body size and may be strained to failure during impact grip with the road in a crash.”

MotoCAP senior researcher Dr Chris Hurren
Dr Chris Hurren

Rider error

However, some complaints about protective clothing failures can be due to rider error, not product failure.

Waterproof claims are a classic example, says Link International product manager Ron Grant.

“You can have the best jacket in the world, but if you don’t get all the closures correctly positioned, ensure your shirt collar or cuffs aren’t exposed (which creates a wicking point for water entry) you will still get wet,” he says.

“The majority of wet claims I believe are mainly due to incorrect usage or fitment.

“If you wear gloves over your cuff, water penetrates through the jacket stitching in the chest and arms, runs down between the outer shell and the outside of the waterproof liner (so the rider is still dry) and drains straight into the gloves. This is not a glove issue but a rider fitment issue.

“Likewise with waterproof boots. I see riders buy ‘shorty’ waterproof boots and then complain they get wet feet.

Draggin Hydro waterproof jacket and pants
Draggin Hydro waterproof jacket and pants

“If you have a look at their rain pants when their feet are on the pegs, the rain pants may ride up just enough to allow water into the boots.”

Riders also have a duty to maintain and treat their gear appropriately.

For example, zippers can get dry from dust and bugs etc. An occasional rub over with a candle or an appropriate wax on the zipper teeth will help the zipper slide smoothly and last longer.

Likewise, screwing up a zip in waterproof liner and securing it under a couple of Occy straps can damage the waterproof coating allowing water to enter the jacket. 

Warranty

If your riding gear has experienced a genuine product failure, you may be due a replacement or repair under warranty.

Click here to find out more about warranties.

Have you ever had motorcycle gear fail a basic wear test? Leave your comments below.

  1. I brought a Nolan helmet a couple of yrs ago with a 5 yr warranty. After six months of weekend use only the removable lining started to ‘breakdown and tear’. I contacted the shop I purchased it from, who in turn contacted the distributer, who advised that replacement linings where no longer avaibile for that model helmet. The shop gave a me a good deal o a replacement, but that is not the point. I have had problems with Dainese gloves as well, I had the stitching come away near the base of the thumb on both gloves around the same time within a couple of weeks of purchase and the replacement pair did Dainese gloves for yrs and the quality has declined. I brought a pair of RJ’s as a replacement and they are still fine after 12 months.

  2. I had the front zipper separate on a 1 piece leather suit while participating in a track day at smsp, the suit was 3 years old therefore was out of warranty, but in as new condition. I had only worn it for 3 times. The manufacturer offered to repair it at a cost to me. I opted to have it repaired by a well known leather repairer, who stated that they didnt like that brand of suit.

  3. I bought a pair of HELD summer ‘adventure’ gloves after I killed a Dainese set in a crash. I wore them a on a 6 week trip up north 6 months later (I bought them going into winter), then reverted to my normal double pocket HELD gloves for most of the year again.
    I was 3 months into a Europe trip a year later and the stitching failed on the fingers. I stitched them a bit to try and stop them falling off. I took them back to dealer when I got home to Aus and he said it was a known problem. He sent them back to HELD and they replied saying they were out of warranty. The had seen about 6 months use despite being 18 months old. They showed no sign of wear except the stitching falling out. I wish I could post a pic here!
    HELD wouldn’t budge. They also said I should not have repaired them – I was on the other side of the world for god’s sake!
    I was genuinely looking at a new Held adventure jacket (nearly $1000) but after that experience I have bought my last HELD ‘anything’. This was my third set of their gloves. How to lose a customer!

  4. DriRider is absolute rubbish. I’ve had new boots that had the laces rip out of the eyelets within weeks of purchase and velcro stitching come undone. Pants from the same manufacturer that had stitching rip out, fasteners disintegrate and fabric simply start to shred and hole – with only occasional commuting usage! Gloves that had holes appear in the fingertips and velcro closures that didn’t hold closed. I will NEVER buy DRIRider again. You pay more for Dainese, but it just lasts.

Your email address will not be published. Required fields are marked *

 

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Subscribe
Get free access to the best motorcycle newsletter on the planet

Join The Newsletter